Physics 128, Advanced Experimental Physics, Winter 2018
Physics 128 Staff
Schedule
Work due dates:
Lab-notebook carbons (for each lab partner) and printed writeups (1 per team) are due at 1:00pm
on the following dates. Turned in same day after 1:00pm... 10%
penalty. Within 1 week... 30% penalty. After that... 60% penalty.
Any exception must be agreed to in advance by the TA responsible for that lab
| Laboratory |
|---|
| Course/Time/Section | 1 | 2 | 3 | 4 |
|---|
| A MW 40774 | Mon. 2/5 | Wed. 2/21 | Mon. 3/12 | Thurs. 3/22, 1pm, Homework Box, 1st Floor Broida |
| AB TuTh 66654, 40782 | Tues. 2/6 | Tues. 2/20 | Tues. 3/6 | Thurs. 3/22, 1pm, Homework Box, 1st Floor Broida |
Google Schedule: Physics 128AL - MW section pay close attention; there are two Monday holidays; your last lab on Thursday (NOT MONDAY OR WEDNESDAY), Mar. 15:
Physics 128AL - ICAL link, HTML link
Physics 128BL - ICAL link, HTML link
In Physics 128L, you will work through a set of modern
physics experiments. The main goal is to learn how to
imagine, perform, and report experimental physics results.
Course Information and Material
- Preliminary assignments for TuTh 128A have been made... under tab "Assignments"
- Preliminary assignments for TuTh 128B have been made... under tab "Assignments"
- Material from the first week lecture:
- Notes
- Mathematica Notebook
- Google calendars for the course appear above. For those in 128A,
there will be a mandatory lecture at the first meeting of the
course... note the locations in the calendars above.
- The primary information/text for the course - the lab writeups - here. ASAP, and no later than 11:59pm on Tuesday, 16 Jan for the 2 Tuesday-Thursday sections,
and no later than 11:59pm on Wednesday, 17 Jan for the MW section, sign up for your laboratory
choices:
- You will
be assigned lab partners... labs are done by pairs (and sometimes threesomes) of students. Everyone
cannot get their first choice, and the staff will do their best to make a fair assignment by the end of the first week.
- Get a lab notebook - you will need an official lab book (or two) for the course. Use lab books available at the UCSB bookstore.
This photo shows the possibilities. We recommend the
one on the right, it is a 100-page lab book where each page has a carbon duplicate, for $20. The non-preferred option
is to purchase two of the books on the left, which is twice the cost, but gets you three times the number of pages.
Keeping a good lab notebook is a major skill you must learn in this course; carbons each partner's notebook must be turned in for grades. The key concept in notebook keeping: can both you, and an attentive and knowledgeable second party, reconstruct your work?
(if you purchase two non-carbon books, you will use the second while the first is being graded).
- You and your partner must:
- Each prepare a brief whiteboard presentation ready to give on the first lab day for a new experiment; you may not be asked to give the presentation until the second, third, or fourth lab days.
- Each partner will be chosen at random to give a <5 minute presentation during the first 30 minutes of each of the 4 workdays. Every person enrolled must give a presentation for each experiment. You will receive a grade from 0 through 3 on the presentation.
- The lab preparation work (background for the whiteboard presentation) must be entered in your lab notebook prior to the first lab meeting. You will receive a grade from 0 through 2 on this work. You can correct your work and get some credit back when you turn in the lab notebook for grading.
- Learn to use data analysis software. Please use Wolfram's Mathematica.
It is installed on all lab computers, many UCSB computer-cluster computers, and in the PSR.
For your own computer, UCSB offers a student license. There is a pretty good
tutorial, a little dated now, but good on the basics, here.
Spreadsheets are extremely useful for preliminary work,
but might not provide all the capabilities you need. We have a directory
of useful Mathematica notebooks for Physics 128.
- Use one of two texts on error analysis: Bevington and Robinson and Taylor. The core of
experimental research is constant attention to important errors on the quantities you are measuring, and then on the propagation of
errors to the parameters you are deducing from your experiment. Note the important errors on numerical quantities you
record in your logbook. Often the error on independent variables or "instrument settings" is negligible, and need not be noted, but
you do well to mentally imagine what the error is on those as well. The texts linked help greatly on propagating errors on your
recorded quantities to the parameters you deduce from the experiment.
- Learn to use a scientific word processor to write-up the report that describes your work. Four reports will be required,
and lab partners turn in one report, in addition to the turning in of lab notebooks. We strongly suggest that you use
LaTeX on Overleaf, where accounts are free. We have
an example report that you may use to learn the format and technical details. We've posted a brief summary to the formatting commands
here. Once you
have an Overleaf account, you can copy this example into your directory space.
Please give yourself extra time to learn to
use this word processor... it is not trivial, and most scientific reporting uses it. Reports must be brief and to the point. Longer analysis to
support the brief lab report must be written in the lab notebook. The lab notebooks will also be used to assess if work
was shared fairly between lab partners.
Grading and Flow
Over your four lab days available to complete your work:
- On day 1, you and your partner will show up, having read the
lab, done the pre-lab work in your lab notebook (each lab's pre-lab notebook work will be
worth 6% of that lab's grade) and be prepared to go to the board and give a very
brief description of the lab and what you will do. This talk should give the principle of the experiment,
present some mock data for one of the key measurements, and present an error analysis for that measurement. Terseness is necessary, and going too long will lower your grade. Each presentation will be worth 9% of that lab's grade.
Every group must prepare such a talk; a random subset will be picked to actually deliver it. You will be asked questions that will contribute to the grade.
The talks and pre-lab 15% of your overall course grade; the first lab will be deweighted.
- On days 1-4, you will work independently on the labs,
keeping all of your data/procedures/observations/comments in a
professional-style lab notebook.
The staff will circulate to help you. Attendance is required, firstly because your labmates expect you to work as a team, and secondly because we're paying attention.
The notebook is worth 48% of your overall course grade. You must also record the work to analyze your data outside the laboratory, in preparation
for your report, in your lab notebook.
The grading breakdown for the logbooks is here.
- On roughly first day of the next block (because of the holidays this quarter, there is some variation recorded in the schedules above) you must hand
in the previous block's notebook page carbons, plus your short report.
The reports combined are worth 36% of your overall course grade.
The grading breakdown for the report is here.
- Important: an earnest pre-lab, notes in the lab notebook, and solid writeup with final
values that are off from final "textbook" numerical values will generally receive a higher grade than
sketchy pre-lab, lab notes, and writeup with perfect final numerical values. Indeed, it will
be possible to get an "A" with final numerical values that are somewhat far off from the "textbook",
if there is an excellent discussion of errors, and, perhaps, the errors that caused the measurements
to differ from the "textbook".
Safety
There are important safety issues in any lab work, of which you must be aware.
Some examples of safety hazards are intense light sources (lasers and gas discharge tubes),
electrical hazards (high voltage or current), radiation sources (radioactive substances or X-ray machines),
extreme temperatures.
I require that you start each experiment by doing an assessment of the safety issues.
You will need to take steps to carry out your experiments safely; this is part of acting like a professional experimentalist.
For example:
- Look for safety-related information in the lab manual.
- Look for safety-related information in the equipment manuals.
- Ask an instructor about anything that concerns you.
- Include safety in the planning discussions with your lab partner.
- Communicate clearly and unambiguously with your lab partner while working.
Important safety rules that everyone must follow are:
- You must never work alone. There must always be at least two people in the room.
- Never leave activated equipment unattended without approval from an instructor.
- If any accident occurs, you must immediately report it to an instructor.
Last revision, 01/17/2018, Harry Nelson
